Surface Prep:
Pre clean the surface with 1-951 Silicone Remover wipe
on and wipe dry. Sand surface with P400 or finer grit
abrasive. Remove all sanding debris with compressed
air, sanding vacuum and clean with 1-951 Silicone Remover
wipe on and wipe dry. Mask entire vehicle to eliminate unwanted overspray.
Substrates:
MM 500 – 5999 BeroBase 500 Series should only be
applied over well sanded/scuffed and degreased primed
bare steel, primed aluminium and primed plastic. Well
sanded GRP, OEM primer and old paint systems in good
condition. Please make sure you choose a suitable primer/surfacer.
Product Description:
MM 500 – 5999 BeroBase 500 Series is a clear-over-base system for passenger cars, commercial vehicles and coaches.
The system provides an exceptional optical effect, high durability, resistance to chemicals and gloss retention.
BeroBase 500 Series is a high-quality basecoat system that needs to be finished with a clear coat. The 500 Series contains 25% less mixing colours then comparable systems which means lower investments and less stock. The compact and complete system can be applied with both conventional and high efficiency techniques. Nevertheless it’s a complete system, all solid, metallic and pearl/mica car colours can be made.